The tiles because of their glossy appearance might look clean but the grout that connects them is not always clean. Different microorganisms like bacteria and viruses can make their homes in the grouts if not cleaned frequently.
The grout should get cleaned at least once a week so the floor remains germfree. Many toxic products are available in the market which you can use to clean the grout on tiles which are harmful to nature and the tiles itself.
So, here are introducing the ways how to clean grout on tiles without using toxic products.
The grout must be kept neat to avoid dirt and mold. It can be done periodically and with ingredients that take care of the tiles and the environment.
Floors can be shiny and new if you also clean the grout. There are different methods you can use to renew your look. Ideally, use natural, non-toxic ingredients to protect the tile.
Contents
How To Clean Tiles With Natural Products
Sodium bicarbonate
Prepare a thick paste with three parts of baking soda and one of water. This mixture is useful for any type of tile. Apply the solution to the lines with your finger. Wearing rubber gloves can help prevent scratches or any irritation.
Scrub the grout with a brush. It can be nylon or dental strings. Pay attention to the corners and edges to keep them clean. Rinse and change the water so that no residue remains.
Sodium percarbonate
Dissolve two tablespoons of sodium percarbonate in two cups of warm water. Mix well so that it is well activated. Test an inconspicuous corner before cleaning everything. Some tiles may be bleached or discolored.
Pour in the solution. Make sure you put in enough to cover all the grout lines. Clean the floor section by section so as not to get it completely wet.
Use a nylon bristle brush and leave for several minutes. You will get a darker stain; Dip the brush directly into the powdered sodium percarbonate. Rinse the soil with water and pat dry.
Hydrogen peroxide
Mix ¼ cup of hydrogen peroxide, a tablespoon of dishwashing liquid, and ¼ cup of baking soda. Each ingredient works in the following way:
- Baking soda acts as a natural abrasive to scrub the grout.
- Hydrogen peroxide reacts chemically and releases bleaching oxygen ions.
- The dishwasher helps loosen dirt and removes grease.
Before applying always do a test before. Apply the paste with the brush and let it act for 15 minutes. You will see a bubbly reaction and then rinse with warm or hot water.
Lemon juice
The problem with gaskets, especially in kitchens, is that they accumulate a lot of fat. Use the lemon juice diluted in a little water. It is applied and rubbed until they are clean. You can also add a little dishwasher.
Another option is vaporizers that effectively clean and disinfects all types of tiles and grouts because they do not use any toxic chemicals.
How To Clean Tiles With Simple Green Solution
Instructions:
When in doubt, always do a little test on the stain first.
When cleaning stubborn dirt, pre-wet the surface. This will help Simple Green penetrate dirt and make cleaning easier.
Apply the Simple Green solution. Let the product soak for a minute or so to allow dirt and grease stains to dissipate.
Rub if necessary. Scrubbing with a soft brush or non-abrasive cloth provides agitation, which will help remove dirt and ensure absolute cleanliness and a residue-free surface.
Rinse with clean water. Rinse by wiping with a damp microfiber sponge or non-abrasive cloth to insure a residue-free surface. Surfaces in contact with food and pets should be rinsed with plenty of clean water.
Dry and polish with a clean microfiber sponge, non-abrasive cloth, or paper towels.
For reflective surfaces, glossy finishes, and polished glass and metal, this final step will leave a streak-free surface and a sparkling clean.
Sometimes you found pet hair on your floor, then you should use a pet hair vacuum cleaner.
Dilution recommendation
Difficult dirt
- Grease spills, stuck food scraps, dirty surfaces, cooking oil, pencil, etc.
- Apply Simple Green undiluted.
- Moderate daily cleaning.
- Dilute approximately 28 g of Simple Green in 1 glass of water.
- Finally use a vacuum cleaner for dirt, debris for pet hair.
Gentle cleaning
- Dust and fingerprints on reflective or high-gloss surfaces.
- Dilute approximately 28 g of Simple Green in 4 glasses of water.
Here all the natural ways to how to clean grout on tiles are discussed. All the substances we have recommended are toxic-free and fully natural which will not make any hark to the tiles and your health.
Cleaning the grouts is one of the vital tasks that need to be performed regularly. So, clean it as frequently as possible.
Many of the microbes that remain on the surface which cannot be seen with bare eyes and can be extremely harmful like the Coronavirus.
Follow the instructions carefully and clean your tiles regularly. That’s all here. Hope you live a healthy and disease-free life.
Writer, traveler, and activist John L. Turner is the author of five books about outdoors, sports, home, power, uprisings, art, environment, place, pleasure, and hope. He is a contributor @homeplix.